Dynamic solutions for a fluid world™

AFT Product Tips

Welcome to the Applied Flow Technology Blog.
Scott Lang

Not a Leak! Modeling Multi-stage Pumps with Discharge Flow Between Stages

 ​AFT Fathom has long included the ability to model multi-stage pumps by representing them with an overall effective pump curve. New in AFT Fathom 10 is the ability to model "Interstage Bleed" or "Takeoff Flow" in these multi-stage pumps.

Continue reading
Recent Comments
Scott Lang
Hello Michael, Thank you for your question! This feature in AFT Fathom 10 is primarily a convenient way to calculate the pump cu... Read More
Monday, 15 October 2018 22:48
  1422 Hits
  2 Comments
Ben Keiser

Intermediate Elevations and Splitting Pipes

Hello AFT readers! It has been quite a while since I have written a blog for you all. I had a recent discussion with a user and discovered a couple pain points that may be common. We did not have any blogs on the topics yet and I figured it was time to get back in the game and write another blog for our readers! The pain points were: 1. Modeling sy...
Continue reading
  1979 Hits
  0 Comments
Stephanie Villars

Get More Flexible With Your Fluids

Here at AFT we are always looking for more ways to bring more convenience and accuracy to our model files. One of the ways we are doing this is with NIST REFPROP, the new fluids database that we have incorporated into AFT Fathom 10 and is coming soon in AFT Arrow 7 and AFT Impulse 7. Unlike Chempak, REFPROP is included at no additional cost to users. In this blog I will highlight a few reasons why you may want to take advantage of this database.

Continue reading
Recent Comments
Stephanie Villars
Thanks for your question! Yes, you can model non-newtonian fluids such as sludge in AFT Impulse using one of the non-newtonian vis... Read More
Friday, 22 March 2019 17:43
  1690 Hits
  2 Comments
Applied Flow Technology

It’s a Pump Properties Party!

Everyone loves to celebrate. Here at AFT, we are celebrating the release of AFT Fathom 10 . One of the great things about AFT Fathom 10 is that the new and improved Pump Properties window makes specifying pumps faster and easier than ever.  This blog will provide an overview of the features that have been added or changed within the Pump Prope...
Continue reading
  2104 Hits
  1 Comment
Ben Keiser

Liquids And Gases And Slurries, Oh My!

Tip:  If you know how to use AFT Fathom , then you are over the learning curve by about 90% when it comes to knowing how to use AFT Arrow , and about 80% of how to use AFT Impulse . ​ One of the best advantages to AFT software tools is they offer a full solution for any single-phase pipe flow analysis calculations. Whether you are dealing with...
Continue reading
  980 Hits
  0 Comments
Erin Onat

Pulsation Frequency Analysis Takes a New Turn

In recent years, engineering efforts have been increasingly focused on analyzing and preventing detrimental pulsations in pipelines. One major source of these pulsations is caused by acoustical resonance. Undesirable acoustical resonance happens when pressure pulses (the source of which is often a positive displacement pump) excite the system's nat...
Continue reading
  939 Hits
  0 Comments
Applied Flow Technology

Iso love the new Pipe Drawing Mode!

Have you ever wanted to show the three-dimensional nature of your piping system in AFT applications? Maybe you are building a model from an isometric reference drawing. Or maybe you are incorporating your model into a report and want to represent the x, y, AND z axes.

Whatever the reason may be, the great news is that AFT Fathom 10 includes a new Isometric Pipe Drawing Mode!

Continue reading
  2550 Hits
  0 Comments