AFT Training Seminars

Advance your flow analysis skills! 

Whether you're new or experienced, you'll find AFT seminars a worthwhile investment of your time. In-person training seminars are held in Colorado Springs, CO, USA and are led by our professional engineers.

Attendees will learn hydraulic flow and gas flow analysis techniques while gaining tips and tricks to make the process seamless.

Seminars include the use of a computer and software, and each attendee is provided extensive training materials to keep for reference.

AFT Training Seminar Dates

Colorado Springs, Colorado, USA
All Seminars are full-day and include lunch and the use of computers.

AFT Fathom
Incompressible Flow 
AFT Arrow
Compressible Flow 
AFT Impulse*
Waterhammer & Surge


March 4-5, 2024

June 10-11, 2024

October 7-8, 2024
 

March 6-7, 2024

June 12-13, 2024

October 9-10, 2024
 

March 6-8, 2024

June 13-14, 2024

October 9-11, 2024
     


*Advanced Class. See details below.

AFT Fathom Training

AFT Fathom™
In-Person Training Seminar

  • Model pumping systems
  • Pump and valve sizing
  • Incompressible flow hydraulic theory
  • Use scenario manager
  • Troubleshoot models
  • Introduction to add-on modules
  • Network solution methodology
  • Understanding solution control
  • Sizing control valves
  • Modeling systems with heat transfer
8am - 5pm  | Colorado Springs, CO
 
2-Day Course Cost: 
  • SUM Subscriber: $1,300  
  • Non-SUM Subscriber: $1,400 
  • Student / Instructor: $50
Includes computers, software, training books, & lunch.
8am - 5pm  | Colorado Springs, CO
 
2-Day Course Cost: 
  • SUM Subscriber: $1,300  
  • Non-SUM Subscriber: $1,400 
  • Student / Instructor: $50
Includes computers, software, training books, & lunch.

AFT Arrow™
In-Person Training Seminar

· Modeling real gases
· Understanding sonic choking
· Modeling systems with gas mixing
· Compressible flow hydraulic theory
· Use scenario manager
· Troubleshoot models
· Introduction to add-on modules
· Network solution methodology
· Understanding solution control
· Sizing control valves
· Modeling systems with heat transfer
AFT Fathom Training
AFT Fathom Training

AFT Impulse™
In-Person Training Seminar

  • Understand surge communication times
  • Modeling transient cavitation
  • Model pump transients, including inertial effects
  • Modeling time & event based transients
  • Model relief & vacuum breaker valves
  • Troubleshoot AFT Impulse models
  • Predict unbalanced pipe forces
  • Choosing the best trade-offs between model run times
  • Model pipe sectioning round off errors
  • Understand graph & animation features
  • Size & locate surge suppression equipment
Note: Attendees must have a clear understanding of steady-state analysis, and the essentials covered in the AFT Fathom 2-day class. For this reason, new Impulse users must take AFT Fathom in combination with this class.
8am - 5pm  | Colorado Springs, CO
 
3-Day Course Cost: 
  • SUM Subscriber: $1,900  
  • Non-SUM Subscriber: $2,100 
  • Student / Instructor: $50
Includes computers, software, training books, & lunch.
This class is taught in a virtual format or on-site at your location. This class is not held in Colorado Springs at this time.

Please complete this Training Request Form. An AFT representative will contact you to discuss your training preferences (virtual or on-site) as well as what topics you would like to include.

AFT xStream™ Virtual Training

  • Methodology
  • AFT xStream Fundamentals, Applications, and Examples
  • A Critique of Steam Hammer Load Analysis Methods
  • Improved Method of Estimating Steam Hammer Loads
  • AFT Transient Forces
  • Gas Transient Analysis for Process Safety
  • Examples on Relief Valve Piping and Boiler Steam Blow
AFT Fathom Training
Log in

Login to your account

Username *
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name *
Username *
Password *
Verify password *
Email *
Verify email *
Captcha *
Reload Captcha
© 1996 - 2023 Applied Flow Technology