Dynamic solutions for a fluid world™

AFT Product Tips

Welcome to the Applied Flow Technology Blog.
Applied Flow Technology

Quick Inspection of Pipe and Junction Properties

The inspection feature saves time by displaying the properties of a Workspace object in a read-only fashion. To inspect an object, position the mouse pointer on the object and hold down the right mouse button.
  1087 Hits
  0 Comments
Applied Flow Technology

Building Large Models - The Building Block Approach

Very large and complex models may be constructed by building smaller models and merging them together. It is a good idea to break the large system into logical parts where there are known boundary conditions (flowrates or pressures).
  1080 Hits
  0 Comments
Applied Flow Technology

Merging Two Models Together

Models may be merged together by selecting Merge... from the File menu. Before starting this process it is always advisable to save your current model. You will be asked for the file name to merge into the current Workspace. The model being merged in will be placed on the Workspace and each object will be selected. Move the merged model by positioning the mouse pointer on a selected junction and holding down the left mouse button and dragging it to the desired location on the Workspace. If you accidentally click somewhere off the selected items they will be come unselected and...
Continue reading
  1046 Hits
  0 Comments
Applied Flow Technology

Eliminating 'Negative' Flows

Flow direction arrows are for reference only, the actual direction being determined by the analysis and, if the direction is opposite the reference direction you've specified, values for flow, velocity and pressure drop will be negative. If you don't want negative values, simply select the pipe, press F3 to toggle the direction arrow and rerun your model. While this is fine for one or a few pipes, what if you have many pipes with negative flow values? Within the Workspace, open Select Special (on the Edit menu or by pressing F6). For 'Selection Type', select 'Pipe Output Properties', then 'Volumetric Flow...
Continue reading
  1294 Hits
  0 Comments
Applied Flow Technology

Moving a Junction Without Moving the Pipe

Click on the junction to be moved once to select it. Then hold the Ctrl key down while you drag the junction icon and the pipes will remain in their current location. Note this results in the pipes being disconnected from the junction.
  1233 Hits
  0 Comments
Applied Flow Technology

Building Multiple Models

While we usually think of building a system model in the Workspace (and, of course, we can have multiple models within a file in different scenarios), you can have multiple, disconnected system models within the work space simultaneously. This has many uses, including facilitating parametric modeling. For example, you're modeling a system with a defined supply flow and want to evaluate the results for various supply flow rates. After building the model, select the whole model (Edit/Select All or ctl+a), then duplicate it (Edit/Duplicate or ctl+d) as many times as desired. For each instance specify a different supply flow and, after...
Continue reading
  1284 Hits
  0 Comments
Ben Keiser

Problems With Heat Exchanger Specified Heat Rate In Constants?

Using “Specified Heat Rate In Constants” for the thermal model of heat exchangers can often cause problems in system models.  The reason why is because this thermal model type causes the heat exchanger to act like an “assigned heat input” junction as does an assigned flow junction does for providing constant flow rates.  Another problem is that this thermal model can cause unrealistic temperature changes across a heat exchanger.  When the heat rate is specified and the mass flow rate and heat capacity are calculated based on the system solution, the temperature change will be whatever is required to maintain the...
Continue reading
Recent Comments
Des Aubery
Very useful tip. Thank you. In many heat-exchangers, the relationship between heat-transfer & flow-rate would have a curve with c... Read More
Wednesday, 10 April 2013 09:37
  4134 Hits
  2 Comments