AFT Blog
Hello AFT readers! It has been quite a while since I have written a blog for you all. I had a recent discussion with a user and discovered a couple pain points that may be common. We did not have any blogs on the topics yet and I figured it was time to get back in the game and write another blog for our readers! The pain points were: 1. Modeling sy...
In district heating projects, hot water is the most commonly used heating medium. In order to ensure the user's heat load requirements, it is necessary to analyze and calculate the flow balance of the entire district heating system to ensure that different cases can meet the requirements of end users.
AFT Fathom is practical fluid dynamic simulation software used to calculate pressure drop and flow distribution in liquid piping and ducting systems. I think AFT Fathom is a great choice for district heating projects.The district heating network model of this project is bigger, and it includes the long supply line and return line, several booster pump stations, about 50 end users(exchangers), many control valves. This project has been running for 2 years, but some end user cannot get enough heat, so the owner hope us to get the reason.
Here at AFT we are always looking for more ways to bring more convenience and accuracy to our model files. One of the ways we are doing this is with NIST REFPROP, the new fluids database that we have incorporated into AFT Fathom 10 and is coming soon in AFT Arrow 7 and AFT Impulse 7. Unlike Chempak, REFPROP is included at no additional cost to users. In this blog I will highlight a few reasons why you may want to take advantage of this database.
Everyone loves to celebrate. Here at AFT, we are celebrating the release of AFT Fathom 10. One of the great things about AFT Fathom 10 is that the new and improved Pump Properties window makes specifying pumps faster and easier than ever. This blog will provide an overview of the features that have been added or changed within the Pump Propert...
Tip: If you know how to use AFT Fathom, then you are over the learning curve by about 90% when it comes to knowing how to use AFT Arrow, and about 80% of how to use AFT Impulse. One of the best advantages to AFT software tools is they offer a full solution for any single-phase pipe flow analysis calculations. Whether you are dealing with liqui...
In recent years, engineering efforts have been increasingly focused on analyzing and preventing detrimental pulsations in pipelines. One major source of these pulsations is caused by acoustical resonance. Undesirable acoustical resonance happens when pressure pulses (the source of which is often a positive displacement pump) excite the system's nat...
Have you ever wanted to show the three-dimensional nature of your piping system in AFT applications? Maybe you are building a model from an isometric reference drawing. Or maybe you are incorporating your model into a report and want to represent the x, y, AND z axes.
Whatever the reason may be, the great news is that AFT Fathom 10 includes a new Isometric Pipe Drawing Mode!