Log in

Login to your account

Username *
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name *
Username *
Password *
Verify password *
Email *
Verify email *

AFT Blog

Welcome to the Applied Flow Technology Blog where you will find the latest news and training on how to use AFT Fathom, AFT Arrow, AFT Impulse, AFT xStream and other AFT software products.

Fathom 11 New Features at a Glance

  Recently AFT announced our new release of Fathom 11. With our new release we have been working hard to create a more robust and faster version of Fathom. Along with improved performance we have added several new tools that have been requested by customers. Here is a quick summary of the top 5 new features that you can look forward to in Fath...

Continue reading
  2488 Hits

Where to Start with Pump Startups

Any time a rapid transient occurs in a piping system, there is a chance for unexpected surge to impact the system. Though system shutdowns account for many surge events, pump startups can cause water hammer as well. For this blog I am going to cover the basics of setting up pump and valve transients for the startup case in AFT Impulse 7, as well as...

Continue reading
  2990 Hits

Know Your Pump & System Curves – Part 2A

Many users enjoyed my previous blog, "Know Your Pump & System Curves – Part 1" and greatly anticipated the release of Part 2. I'm going to split Part 2 into two separate blogs: Part 2A Brief discussion on why system curves matterPump & System Curves for multi-branched piping systems§How you can have different system curves for the...

Continue reading
  7400 Hits

Making Sense of xT – Valve Loss in Compressible Flow

Almost every piping system has valves, and an accurate solution requires accurate valve losses. For incompressible systems, this is relatively straightforward. What happens when we introduce the complexities of compressible flow?  

Continue reading
  8531 Hits

Size Up Your Options Using the ANS module

When working on a new piping system, there are many factors that must be taken into account: meeting customer demands, following industry standards, and maintaining effective system operation to name just a few. As a busy engineer, it is important to address all of these concerns in the short time frame available to you. AFT's new Automated Network...

Continue reading
  1937 Hits

Looking to relieve pressure? Let's talk about Relief Valves in AFT Impulse.

In any complex piping system, one of the most serious scenarios considered during a safety or HAZOP study is over-pressurization. If the pressure in the system reaches a high enough pressure, rupture can occur, leading to expensive repairs, significant system downtime, and even loss of life. In most cases, proper use of relief valves can mitigate o...

Continue reading
  4334 Hits

Applying Communication Time: Let’s Talk About Your Impulse Result/Event Relationships

 I have received questions from clients using AFT Impulse where they ask something like "I closed this valve. Why is the maximum pressure spike way over there and not at the valve?" This comes from years of developing a "common sense" adapted to steady-state flow. With steady flow, a change between states of equilibrium has a local effect that...

Continue reading
  1678 Hits
© 1996 - 2022 Applied Flow Technology