AFT Blog
The Opposite of Good Vibrations - Evaluating FIV, AIV, FIP Guidelines from AFT Fathom and AFT Arrow
Learn how to use AFT Fathom and AFT Arrow to help calculate the Likelihood of Failure (LOF) for Flow Induced Vibration (FIV), Acoustic Induced Vibration (AIV), and Flow Induced Pulsation (FIP) in accordance with Energy Institute Guidelines to avoid v...
What Is Transient Analysis?
You're tasked to perform a transient analysis of a piping system and it would be really helpful if there was a good software tool out there to help you. Well, you've come to the right place because AFT has great solutions! ...
Know Your Pump & System Curves - Part 3
In the final "Know Your Pump & System Curves" blog series, I am going to discuss the complexities behind pump vs. system curves for systems with pumps in series and parallel configurations. Multiple pumps in series configurations are relatively s...
Digital Twin – Identical or Fraternal?
When I was a child, I was jealous of twins. I thought how cool it would be to have a twin. I had twin cousins a few years older than I was that I saw on a frequent basis. I always got them confused. Which one was Roger, and which one was Ronny? A buz...
To define any transient event in AFT Impulse or AFT Fathom XTS the application must know when it begins. To do so, the user should know how time and event logic is approached in AFT’s transient solvers. In this article, we will discuss the three different time bases used in the applications, the selection of a single or repeating event, and the many possible triggering events that can start the user defined transient. The user defines these items in the Initiation of Transient section of the junction’s Transient tab. The requirements for each junction can vary, but the general approach applies...
In February I reached a new low. Up until that point, my lowest point happened as a child in my home state of California. That was when my father took me through Death Valley - elevation 282 ft (86 m) below sea level.
But this was different. I was not going to the lowest spot in North or South America (Death Valley). I was going to the lowest spot in the entire world. I was on my way to the Dead Sea. Located on the border between Israel and Jordan (see my personal photos below), the Dead Sea is at an elevation of 1412 ft (431 m) below sea level - and getting lower all the time as it further evaporates.
Technology has sure come a long, long way. As I am sure all of you know, Disney has been a technology innovator in the entertainment industry for nearly a century. The gee-whiz things Disney does has helped inspire many like myself to pursue technology careers.
Once again Disney has used technology to create a "Wow!" experience. I am talking about the new Flight of Passage ride at Disney World in Florida. I visited there a few weeks ago on opening weekend of the new Pandora - World of Avatar land at Disney's Animal Kingdom park. The new land and this ride in particular are based on the top grossing movie of all time - Avatar. This new ride ("attraction" in Disney parlance) is unlike anything I have ever experienced. I got to ride it twice on this trip. This ride simulates a wild ride on the back of flying banshee like those found in the Avatar movie. The Na'vi word for the banshee is Ikran.
It was sometime around 1988 and it was pitch dark outside. I and some of my aerospace colleagues from work were driving in a car caravan from San Diego to Edwards Air Force Base at the ungodly hour of 3AM. The Space Shuttle Discovery was scheduled to land that morning and we wanted to see it.
I had to laugh when I read this article in last week's edition of Businessweek "Big Oil’s Rejection of Silicon Valley Is Finally Coming to End". Who would have thought oil companies were so backwards? I bet they still use sliderulers too! Here is one of the opening quotes:
This past week I and Jeff Olsen, AFT’s V.P. of Technology, attended the annual conference of the Hydraulic Institute. The Hydraulic Institute (HI) was founded in 1917 and is America’s premiere pump organization. At this year’s meeting HI held a centennial celebration.
Pulsation in fluid systems...Is it steady-state or is it transient? Well, it is both. Kind of. Pulsation causes periodic transients that are regular in nature and thus considered steady-state. It can be called "steady-state pulsation".