AFT Blog
Welcome to the Applied Flow Technology Blog where you will find the latest news and training on how to use AFT Fathom, AFT Arrow, AFT Impulse, AFT xStream and other AFT software products.
In AFT Fathom and AFT Impulse, it is possible to model a submerged pump where a short and possibly frictionless suction pipe for the pump’s inlet does not need to be modeled. When modeling a submerged pump, there are two options available for specifying the system inlet boundary condition at the pump suction. As shown in Figure 1 below, the Submerged Pump’s Suction Pressure can either be specified as “Head (HGL)” or “Pressure”. Modeling a submerged pump is not the only time where the “Head (HGL)” or “Pressure” choices will arise. If an Exit Valve (i.e., a valve that discharges...
10574 Hits