Dynamic solutions for a fluid world™

AFT Fathom Settling Slurry Module

Extended Capabilities for Settling Slurry Applications

Failure to accurately account for slurry properties, changing concentrations and pump performance can lead to system failure and excessive operational costs.

The Settling Slurry module helps…

  • Predict settling velocity and onset of deposition
  • Prevent plugged pipes and misapplied pumps
  • Reduce energy usage
  • Improve system performance
  • Reduce operating and maintenance costs

This module has been designed specifically for AFT Fathom and can work with your existing models. 

The AFT Fathom SSL module lets you…

  • Accommodate a wide range of slurry data
  • Enter properties of solids particles and keep them in a sharable database
  • Display special output reports with im, jm, settling velocity, slurry volume, mass flows and other slurry specific parameters
  • Evaluate multiple design and operating cases using Scenario Manager
  • Generate special slurry system curves, critical to understanding important system velocity limits
  • Use state-of-the-art correlations to predict flow, pressure drop and reduced pump performance when pumping solids
  • De-rate pumps

Modeling Features

  • Specify Slurries:
    • Basic Water Slurry Input - uses water as the carrier fluid and treats all pipes as isothermal
    • Advanced Slurry Input - use any fluid as the carrier fluid, allow slurry properties to vary among pipes, and allow heat transfer and system energy balance calculation
  • Choose from three slurry calculation methods:
    • Minimal - can be used in the preliminary design phase
    • Simplified - additional information is required and gives a better solution
    • Detailed – (default) provides the most rigorous solution methodology
  • Select excess pressure vs. velocity data to calculate a slurry's M parameter
  • Pump Performance:
    • Choose from two pump slurry de-rating methods
        - ANSI/HI Standard 12.1-12.6-2005 method
        - Warman method
    • Calculate system head loss
    • Generate pump vs. system curves for single or multiple pumps that answer key questions:
        - At what flow will deposition begin?
        - When will increasing head with decreasing flow occur?

pdf button AFT Fathom Modules Data Sheet

pdf button AFT Fathom Modules Data Sheet - Spanish